Choosing between the $999 standard 500W and $1,299 upgraded 750W Lectric XP4 starts with your budget, expected riding distance and storage plan. Both versions have torque-sensing pedal assistance, a folding frame and the same listed core components. The $300 upgrade adds motor output and battery capacity; it does not change the bike into a lightweight folder.
Storage spaces, vehicle trunk openings, and lifting capability dictate whether a 69-to-71-pound folding e-bike fits daily transportation routines. Evaluating motor specifications, dimensions, and frame styles side by side clarifies which build matches specific riding environments.
 |
What the $300 Performance Upgrade Changes
As checked on October 21, 2026, Tampa Bay eBikes lists the 500W configuration at $999 and the 750W configuration at $1,299—a $300 difference. Prices are subject to change, and build and assembly fees apply. Check the selected configuration and current total before ordering.
The 500W nominal rear hub motor is rated at 1092W peak and 55Nm of torque, paired with a 48V 10.4Ah battery listed as 500Wh. The upgrade has a 750W nominal motor rated at 1310W peak and 85Nm, paired with a 48V 17.5Ah, 840Wh battery. These are manufacturer specifications, not measured results from our shop.
| Feature | 500W | 750W |
| Shop price | $999 | $1,299 |
| Motor | 500W | 750W |
| Peak | 1092W | 1310W |
| Torque | 55Nm | 85Nm |
| Battery | 500Wh | 840Wh |
| Max range* | 50 mi | 85 mi |
| Sensor | Torque | Torque |
| With battery | ~69 lb | ~71 lb |
*Manufacturer maximum estimates, not our test results. Actual range varies with load, assist level, terrain and weather. Prices checked October 21, 2026; subject to change. Build and assembly fees apply.
Core Hardware Across Both XP4 Configurations
Both performance packages list a 6000-series aluminum folding frame and these core features:
- 20 x 3-inch tires.
- Shimano Altus 8-speed drivetrain with trigger shifting for mechanical pedaling control.
- Hydraulic disc brakes with 180mm rotors.
- Front suspension fork featuring integrated tension adjustment and mechanical lockout.
- Removable 3.5-inch color TFT display featuring an integrated USB-C device charging port.
- Integrated frame rear rack rated for cargo up to 150 pounds within the total limit.
- Fenders, quick-release pedals and a thumb throttle.
- Adjustable seatpost and handlebar stem for setting your riding position.
The total bike payload capacity is 330 pounds. The 150-pound rear rack capacity functions within that 330-pound total maximum, rather than serving as additional load capacity or blanket passenger authorization.
Realistic Weight and Battery Range Considerations
Advertised maximum range numbers remain manufacturer estimates rather than independent shop test results. Lectric lists up to 50 miles for the 500W build and up to 85 miles for the 750W build, but real-world mileage fluctuates based on total payload, terrain gradient, assist levels, wind resistance, and ambient temperatures.
Higher assistance, a heavier load and more demanding terrain can reduce range. Leave a margin when planning a ride; the advertised maximum should not be treated as a guaranteed distance between charges.
Both models weigh 62 pounds without the battery installed. The standard 10.4Ah battery adds 7 pounds for an approximate total of 69 pounds before accessories, while the 17.5Ah battery adds 9 pounds for an approximate total of 71 pounds.
Measuring Vehicle Openings and Lifting Routes
The Lectric XP4 collapses into folded dimensions measuring 37 inches long, 17 inches wide, and 29 inches high. Folding the frame and stem reduces overall length and height, but folding does not make a 69-to-71-pound bike light to handle.
 |
Measure trunk openings, hatchback sills and indoor access points before buying. Removing the battery reduces the bike’s listed weight to 62 pounds before accessories, which is still a substantial lift. Try the handling task in person and arrange help or suitable equipment if necessary.
Review the current frame options on the product page, then check the space needed to fold, turn and lift the bike—not just the floor area where it will sit. Follow the manufacturer’s instructions for folding, pedal removal and securing the bike for transport.
Selecting Frame Style: Step Over versus Step Through
Frame style selection centers on ease of mounting and leg clearance rather than motor output. Both Step-Over and Step-Thru frames accommodate the same motor variants, but they offer distinct top-tube geometry and color finishes.
 |
- Higher top tube for riders who prefer a traditional frame profile.
- Requires swinging a leg over the saddle or top tube to mount and dismount.
- Available in Tempest Grey across standard builds, with Pine Green available on 750W.
Step-Over Frame
- Lower swooping frame tube allowing riders to step directly through the center.
- A lower frame opening may make mounting easier; check your own leg clearance and balance in person.
- Available in Stratus White on standard builds, with Raindrop Blue offered on 750W.
Step-Thru Frame
Manufacturer rider-height guidelines specify fit for riders between 4 feet 10 inches and 6 feet 3 inches. This guideline offers an approximate baseline rather than a guaranteed individual fit, making an in-person cockpit assessment valuable for riders at either end of the spectrum.
How to Choose Between the 500W and 750W XP4
Start with the 500W configuration if its lower price, 500Wh battery and 55Nm torque rating fit your intended use. It saves about two pounds compared with the larger-battery version, but both remain heavy bikes to lift. A showroom fit and handling check is more useful than assuming either version will be easy to carry.
 |
Consider the 750W configuration if the larger 840Wh battery and higher 85Nm torque rating justify the extra $300 for your plans. These specifications may be useful for longer outings or more demanding loads, but they do not guarantee a particular acceleration, climbing result or real-world range. Both versions retain the same 330-pound total payload limit.
Ready to Select Your Lectric XP4 Configuration?
Compare current motor packages, frame designs and color choices in our online store. Accessories shown in product photography may be optional and sold separately.
Frequently Asked Questions
What does the $300 upgrade between the 500W and 750W models include?
The $300 difference upgrades the motor from 500W nominal (1092W peak, 55Nm torque) to 750W nominal (1310W peak, 85Nm torque). It also increases battery capacity from 10.4Ah (500Wh) to 17.5Ah (840Wh), raising estimated manufacturer range from 50 to 85 miles.
Does folding the Lectric XP4 make it easier to lift into a car?
Folding reduces the listed size to 37L x 17W x 29H inches, which may help with storage. It does not reduce the 69-to-71-pound weight with battery. Measure your own opening and practice the loading movement before deciding it will fit.
Does the 150-pound rear rack capacity add to the total weight limit?
No. The rack’s 150-pound rating is within the bike’s 330-pound total payload, not additional capacity. Follow all manufacturer loading limits and accessory instructions.
Can the battery be removed to reduce lifting weight?
Removing the battery takes off 7 pounds on the 500W model or 9 pounds on the 750W model, leaving a bike listed at 62 pounds before accessories. That is the bicycle without its battery, not a bare frame. Assess whether you can handle it safely before purchase.
Does the rider height guide guarantee a comfortable riding fit?
The manufacturer guide of 4 feet 10 inches to 6 feet 3 inches serves as a general recommendation rather than a guaranteed fit. Individual leg inseams, reach preferences, and arm lengths determine actual riding comfort on both frame types.
Plan Your Lectric XP4 Purchase
Choose the 500W XP4 for its lower purchase price if its listed capabilities meet your needs. Choose the 750W option when the extra torque and battery capacity are worth the added cost and two pounds. In either case, confirm frame fit, lifting comfort and storage clearance before ordering.
Speak With a Local e-Bike Specialist
Showrooms are located at 4004 S MacDill Ave Unit 6 in Tampa, 376 Patricia Ave in Dunedin, and 4116 S 8th Ave Unit B in St Petersburg, with a dedicated service facility at 6020 W Chelsea St in Tampa. Call ahead to confirm current inventory and demo availability.