Start your Lectric XP4 versus XPeak2 decision with the space you have and the configuration you need. XP4 combines a folding frame and stem with 20 × 3-inch tires. XPeak2 has a full-size frame that does not fold and 26 × 4-inch knobby tires. The upgraded XP4 and XPeak2 share the same listed motor ratings, so buying the physically larger bicycle is not automatically buying more motor power.
This guide compares shop listings and manufacturer specifications checked October 27, 2026. It is not a hands-on review or a range test. Use the links to confirm the current motor, battery, frame and equipment before ordering.
Shop Lectric XP4 Shop Lectric XPeak2
Compare the Hardware Before Choosing a Package
| Feature | XP4 | XPeak2 |
| Frame | Frame and stem fold | Full-size; does not fold |
| Tires | 20 × 3 in | 26 × 4 in, knobby |
| Front fork | Front suspension | RST Renegade, 80 mm |
| Motor | 500W or 750W rear hub | 750W rear hub |
| Battery | 500Wh or 840Wh | 720Wh or 960Wh |
| Brakes | Hydraulic; 180 mm rotors | Hydraulic; 203 mm front, 180 mm rear |
| Bike weight* | 62 lb | 64.5 lb |
| Payload | 330 lb total | 330 lb total |
*The weight figures describe complete bicycles without batteries, not bare frames. XP4 batteries add 7 lb for standard or 9 lb for long range. The XPeak2 manufacturer listing gives 10.5 lb for its battery. Include accessories when checking an actual lifting or carrier load.
Both models use torque-sensing pedal assistance, thumb throttles and Shimano Altus eight-speed gearing. They share several control features while differing substantially in wheel size and storage layout. A specification table helps narrow choices, but individual fit and handling still need attention.
XP4: Folding Size and Configuration Choices
The XP4 folds at its main frame and handlebar stem. Lectric lists a folded size of 37 inches long, 17 inches wide and 29 inches high. Measure both the storage space and the opening used to reach it. A trunk opening, tight hallway turn or step may be more restrictive than the final storage area.
The standard model pairs a 500W rear-hub motor with a 500Wh battery. The upgraded package pairs a 750W rear hub with an 840Wh battery. Choose the package deliberately rather than assuming every XP4 listing has the same motor and range estimate. Step Over and Step Through frame options also deserve a separate fit decision.
 |
The 62 lb bicycle weight excludes the battery. Folding changes the dimensions, not that weight. If lifting is part of every trip, ask for a handling demonstration before deciding that a folding bike solves your transport needs.
XPeak2: Full-Size Frame and Larger Tires
XPeak2 uses a nonfolding aluminum frame with 26 × 4-inch knobby tires and an RST Renegade fork offering 80 mm of front suspension travel. Hydraulic disc brakes use a 203 mm front rotor and 180 mm rear rotor. The XP4 has front suspension and 180 mm hydraulic brake rotors.
The XPeak2 High-Step is offered in Tempest Grey and the Step-Thru in Stratus White. Plan space for the complete bicycle and room to maneuver it. The full-size frame may suit a particular rider or storage setup, but larger tires do not guarantee a particular handling or comfort result.
 |
Motor Ratings, Battery Energy and Range Estimates
XP4 standard is rated at 500W nominal, 1092W peak and 55Nm. XP4 upgraded is rated at 750W nominal, 1310W peak and 85Nm, matching XPeak2’s listed motor figures. Both use rear-hub motors. Those ratings do not prove identical acceleration, ride feel or range across the two bicycles.
XP4 offers 500Wh and 840Wh battery configurations, with manufacturer estimates of up to 50 and 85 miles respectively. XPeak2 offers 720Wh and 960Wh, with estimates of up to 60 and 80 miles. Confirm the exact battery selected in your order; the model name alone is not enough.
The advertised distances are manufacturer maxima, not results of a Tampa Bay eBikes test. They are not a controlled comparison between models. Actual distance varies with rider and cargo load, assist level, throttle use, terrain, wind and tire inflation. Choose capacity with a reserve for your routine rather than planning every ride around the maximum.
Fit, Payload and Vehicle Transport
XP4 rider-height guidance is 4 ft 10 in to 6 ft 3 in. For XPeak2, the High-Step guidance is 5 ft 4 in to 6 ft 5 in and Step-Thru is 5 ft 2 in to 6 ft 3 in. Treat these as guidelines: check mounting clearance, reach and brake-lever access for your own body.
 |
Both models list a 330 lb total payload. XP4’s integrated rear rack has a 150 lb rating within that total, not in addition to it. Follow every applicable bike and accessory limit; a rack weight rating alone does not establish compatibility with a child seat or other passenger setup.
For a vehicle carrier, verify the actual bike-and-accessory weight, tire width, wheelbase, attachment method and vehicle limits. Avoid choosing a rack from nominal bicycle weight alone. Ask the shop to help confirm compatibility with the exact bike and carrier.
Prices, Included Equipment and Buying Checklist
Shop prices checked October 27, 2026 were $999–$1,299 for XP4 and $1,499–$1,699 for XPeak2. Build and assembly fees apply. Prices and availability may change, so confirm the selected configuration and final order total.
XP4 includes an integrated rear rack. Confirm other equipment and accessories for either bike before purchase. Manufacturer promotional gift bundles and photos of accessories should not be assumed to describe what is included in the shop order.
- Measure storage access and the complete folded or unfolded space you need.
- Select the frame style, then assess mounting clearance and reach.
- Check the motor and battery options in the exact product variant.
- Confirm accessory compatibility, included equipment and applicable payload limits.
- Review the final price, build or assembly fees, and availability with the shop.
Review XP4 configurations Review XPeak2 configurations
Frequently Asked Questions
Will the XP4 fit inside any car?
No universal fit is promised. Compare its listed 37 × 17 × 29-inch folded size with your actual cargo opening and interior, and assess the lifting task.
Does XPeak2 fold?
No. Its full-size main frame does not fold. Plan storage and transport for the complete bicycle.
Which model has the more powerful motor?
The standard XP4 has a 500W motor; upgraded XP4 and XPeak2 both list 750W nominal, 1310W peak and 85Nm. Compare the actual configuration, not just the model name.
Can I compare them at the showroom?
Contact the shop before visiting to confirm the exact frame or suitable demonstration bike is available. Do not assume a particular model is on display.
Verified Sources and Help Choosing
Product listings: Tampa Bay eBikes XP4; Tampa Bay eBikes XPeak2. Manufacturer references: Lectric XP4 standard; Lectric XP4 upgraded motor and battery; Lectric XPeak2 High-Step; Lectric XPeak2 Long Range.
For configuration or fit questions, contact Tampa Bay eBikes or call 727-228-1975. The South Tampa showroom is at 4004 S MacDill Ave, Unit 6, Tampa, FL 33611. Call ahead for model and demonstration availability.